Mobile Technician II
Company: Penske
Location: Phoenix
Posted on: October 27, 2024
|
|
Job Description:
1041 N. 75th Ave Phoenix AZ 85043 Exciting New Road Tech
Program! Position Summary: Penske Mobile Technician II will
generally assist in the repair and diagnosis of major components or
remove/replace major components at the direction of the PFM Asset
Supervisor. Expectations include the ability to perform preventive
maintenance (PM) service and to diagnose and repair the following
with little or no supervision: Clutches, PTO Systems, Electric
Systems, Hydraulic/Air Brake systems, Heating/Air Conditioning
Systems, and Instruments and Gauges. *This position is managed by
our corporate team, and the Mobile Tech II will not work on
equipment in a Penske facility. Major Responsibilities: Demonstrate
proficiency in the repair and diagnosis of: Engines (gas and
diesel); Power train to include differentials, transmissions,
clutches, drive shafts, PTO's and wheel ends; Electrical systems
including starters and alternators; HVAC systems; Steering systems;
Electronics to include ECM's, ECU's, sensors, etc.; Engine bolt on
items such as turbos, fan clutches, injectors, cooling system,
etc.; Brake systems including ABS; and Suspension systems (spring
and air) Perform mechanical and general appearance reconditioning
of equipment for "trade-ins" and prepare new equipment for
delivery. Identify and determine parts required for repair of
disassembled units Perform all levels of preventive maintenance
services Perform duties with little or no supervision in a timely
and efficient manner Identify warrantable repairs and document on
repair order Maintain on-site work area appearance, safety, and
environmental compliance. Comply with all Penske and Customer work
requirements Road test Vehicles when necessary to diagnose
malfunctions or to ensure that they are working properly. Use hand
tools such as screwdrivers, pliers, wrenches, pressure gauges, and
precision instruments, as well as power tools such as pneumatic
wrenches, welding equipment, and jacks and hoists. Inspect brake
systems, steering mechanisms, wheel bearings, and other important
parts to ensure that they are in proper operating condition.
Perform routine maintenance such as changing oil, checking
batteries, and lubricating equipment and machinery. Adjust and
replace brakes, tighten bolts and screws, and reassemble equipment.
Inspect, test, and listen to defective equipment to diagnose
malfunctions, using test instruments such as handheld computers,
motor analyzers, chassis charts, and pressure gauges. Examine and
adjust protective guards, loose bolts, and specified safety
devices. Inspect and verify dimensions and clearances of parts to
ensure conformance to factory specifications. Specialize in
repairing and troubleshooting of major components such as engine,
transmissions and differentials, to include replacing complete
assemblies, turbochargers, fuel system components etc. Order,
receive, and charge out parts. Maintain control of parts inventory,
including cores, via cycle counts and proper inventory management.
Serve as primary customer contact for day-to-day customer needs,
and escalate as required to sales/operations management. Manage
tire and wheels, both on equipment via inspections and in
inventory. - - Follow Penske safety practices at all times. Other
projects and tasks as assigned by supervisor Why Penske is for You:
• Competitive starting salary • Shift Premiums - 2 nd Shift ($2.50)
3 rd Shift ($3.50) Weekends ($2.00) • Career stability •
Opportunity for growth • Excellent benefits, including lots of time
off • Strong, well-rounded training on a variety of OEM equipment
(Penske's Technician Certification Program is certified as a
Continuing Automotive Service Education provider) • Advanced
vehicle maintenance technology • Location and schedule flexibility
Pay: $29.53/Hour Qualifications: 2-4 years practical experience
with tractor trailer maintenance required High school diploma or
equivalent required Vocational/Technical or certification preferred
Specialized training in the repair and replacement of vehicle
components preferred Proficiency in the use of shop tools required
Current CDL license with air brake certification required,
willingness to acquire CDL if you do not have one. DOT medical card
and/or ability to obtain DOT medical card prior to commencing work.
Ability to read a map. Ability to operate a 26,000 non-articulated
vehicle safely and professionally. Ability to utilize mapping tools
(e.g. Waze) Self starter who is able to work with minimal direct
oversight. Basic computer skills required for data entry into
maintenance systems. Ability to work in non-climate controlled
conditions required The associate will be required to understand
and comply with specific instructions, guidelines, rules,
regulations, or other information established by Penske management
The associate must be able to perform all work adhering to DOT,
OSHA, and all Penske safety and maintenance policies; including but
not limited to the correct selection and use of appropriate tools,
PPE, machine guarding, and established best safety practice.
Regular, predictable, full attendance is an essential function of
the job As this position requires driving Penske and customer
vehicles, it is regulated by the DOT and requires a current driver
qualification file to be maintained as required by the role. The
driver qualification file includes: an annual motor vehicle records
(MVR) check, a successfully completed DOT Physical, and Safety
Performance History records request from prior employers in the
last 3 years. Additionally, CDL holders will have a DOT Drug
Screening within 30 days of start and subject to a FMCSA
Clearinghouse review. Willingness to travel as necessary, work the
required schedule, work at the specific location required, complete
Penske employment application, submit to a background investigation
(to include past employment, education, and criminal history) and
drug screening are required Physical Requirements: The physical and
mental demands described here are representative of those that must
be met by an associate to successfully perform the essential
functions of this job. Reasonable accommodations may be made to
enable individuals with disabilities to perform the essential
functions. • While performing the duties of this job, the associate
will be required to move frequently, stand, walk, climb, bend, and
sit for extended length of time throughout their scheduled working
period. • The associate is required to use their hands on a routine
and daily basis to grasp, reach, touch, handle, feel, and/or
otherwise operate required tools or controls. • The associate must
be able to work safely at heights using applicable ladders and
elevated working platforms. • The associate must be able to safely
work in all weather conditions. • Given the frequent movement of
large trucks through the workplace, the associate must be able to
see and hear in order to safely navigate the work environment. •
The associate must be able to regularly lift and/or move up to
50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg.
Penske is an Equal Opportunity Employer. About Penske Truck
Leasing/Transportation Solutions Penske Truck
Leasing/Transportation Solutions is a premier global transportation
provider that delivers essential and innovative transportation,
logistics and technology services to help companies and people move
forward. With headquarters in Reading, PA, Penske and its
associates are driven by a dedication to excellence and a
commitment to customer success. Visit Go Penske to learn more. Job
Category: Vehicle Maintenance/Mechanics/Technicians Job Function:
Truck Maintenance Job Family: Vehicle Maintenance Address: 1041 N
75th Ave (PTL) Primary Location: US-AZ-Phoenix Employer: Penske
Truck Leasing Co., L.P. Req ID: 2412263 Date posted: 10/26/2024
Keywords: Penske, Phoenix , Mobile Technician II, Professions , Phoenix, Arizona
Click
here to apply!
|