PhoenixRecruiter Since 2001
the smart solution for Phoenix jobs

Mold Technician

Company: Silgan Closures
Location: Tolleson
Posted on: November 26, 2022

Job Description:

POSITION PURPOSE:
The primary responsibility of the Mold Maintenance Technician is to set and remove injection molds, and to perform minor cleaning and maintenance on the molds. The Mold Maintenance Technician will also work with the Supervisor or Process Engineer to optimize the molding process, and must have the ability to do color changes and scale calibration. The Mold Maintenance Technician will be expected to assist the maintenance team as necessary
DUTIES:


  • Lead in coordination with Tooling Engineer all phases of mold rebuilding and refurbishments
  • Schedule and perform in press mold Preventative Maintenance (cleaning of molding surfaces, re-greasing leader pins and wear surfaces)
  • Clean and maintain molds and components using standard cleaning solvents and alcohol, inspect mold components for wear and damage, (compare plastic parts to steel parts to check for wear and damage, measure steel parts using calipers, micrometers, and indicators) and reassemble the molds.
  • Disassemble molds, clean mold plates and components. Troubleshooting mold controllers and hot runners is a plus (doing wiring, inspecting hot runner tips).
  • Set and remove injection molds from molding machines
  • Assist Process Engineer in productivity enhancing projects that are mold related
  • Analyzing and correcting mold related problems (trouble shooting, water leaks, replace components)
  • Maintain a documentation system to coordinate mold repairs and mold transfers to other locations.
  • Maintain the parts inventory for molds.
  • Update and maintain the EAM system
  • Ordering supplies for the mold maintenance department
  • Troubleshoot and repair the electrical issues in the multi-cavity hot runner molds.
  • Assist in molding process set-up and optimization.
  • Identifies and participates in continuous improvement activities
  • Co-ordinate the mold repairs with vendors.

    Job RequirementsREQUIREMENTS:

    • Experience working on high cavitation hot runner molds
    • Able to wire hot runner systems a plus
    • Able to set and start molds in presses (Van Dorn, Husky, and Cincinnati machine experience a plus)
    • Must have experience in trouble shooting electrical problems with hot runner molds.
    • Must be able to read mold design prints.
    • Must have good mathematical and analytical skills. (level 3)
    • Able to use calipers, micrometers, indicators to measure mold components
    • High school diploma preferred, additional post-secondary education a plus (trade school, college)
    • Level 2 English communication and math skills are required.
    • Must be proficient in the use of measurement tools such as vernier calipers, micrometers, depth/height gauges etc. Repeated item as above highlighted
    • Must possess strong mechanical and problem solving skills.
    • Must be proficient in the use of mechanical, hydraulic, electrical and pneumatic tools for general maintenance functions.
    • Must have good mathematical and analytical skills. (level 1)
    • Computer literacy a big plus.
    • Good communication (oral, written and listening) skills.

      PHYSICAL REQUIREMENTS:

      • Repetitive bending from the upright position to approximately a 35 degree angle.
      • Ability to maneuver in various positions including, kneeling, sitting, laying down, as well as working at heights reaching 40 feet.
      • Must be able to stand for 12 hours.
      • Pulling or pushing a hand jack with product weighing up to 500 lbs.
      • Ability to transport heavy equipment and molds (2000 lb) and parts to various locations within the facility.
      • Ability to manipulate heavy equipment when needed.

        LIMITATIONS AND DISCLAIMER
        The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position.
        All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees.
        This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws.
        Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an "at-will" basis.
        Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status.
        Silgan is a drug-free workplace.
        EEO/M/W/Vet/Disability
        You should be proficient in:

        • Tool/Die/Mold Setup Experience
        • Mechanical Troubleshooting Skills
        • Pneumatics Experience
        • Plastics - Nylon 6 Material Experience
        • Plastics - Nylon 66 Material Experience
        • Plastics - PA6 Experience
        • Plastics - PA66 Materials Experience
        • Injection Molding Experience

          Machines & technologies you'll use:

          • Injection Molding Machine (Sumitomo)
          • Die Cast Machine (Cold Chamber)
          • Die Cast Machine (Hot Chamber)

Keywords: Silgan Closures, Phoenix , Mold Technician, Professions , Tolleson, Arizona

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Log In or Create An Account

Get the latest Arizona jobs by following @recnetAZ on Twitter!

Phoenix RSS job feeds